ED3000 Super Range Underground Marker (engineering prototype)

The ED3000 currently only has one engineering prototype and has not yet started large-scale production. If you are interested in this model, please contact us for production arrangements. The expected production time is 4-5 months.

Availability:

Quantity:



Inquire Add to Basket

Product Description

PRODUCT DESCRIPTION

Structural design

The coil diameter of ED3000 supper range marker is 30cm, Due to its high Q-value design, its performance is better than the larger YZ2400.

Electrical Design

The ED3000 disk type marker is designed and produced according to international standard frequencies, and is compatible with electronic marker locators designed and produced according to international standard frequencies (without ID mode). The ED3000 can also be equipped with RFID chips with two modulation modes, ASK and FSK, becoming electronic information markers. Through the ID number in the marker, ground detection personnel can clearly determine that what they have found is the target marker buried in advance, without suspecting whether it is an interference signal or an maker buried by other units. For ID markers, after obtaining the ID number, ground detection personnel can use the ID number to search for information related to the identified object stored in the cloud database (such as the type, specifications, and photos before covering with soil), which can achieve visual management of underground pipelines or facilities.

The ED3000ID-RW type marker, equipped with FSK RFID chips, also supports writing simple information such as marker type and specifications directly into the internal chip of the marker using the ED8000V500 Or future versions locator before covering soil. For remote areas with poor wireless signals, or for users who are unable to upload marked object information to the cloud due to information security factors, a more direct information management solution is provided.

Specifications

1. Physical characteristics

· Shell: HDPE

· weight:465g±10%

· Case diameter - 11.8in (300mm)

· Case height - 1.5in (3.8cm)

· Rockwell hardness: R-116

· Softening point: 105 ℃

2. Environmental characteristics

· Working temperature: - 30 ℃ - 50 ℃

· Storage temperature: - 30 ℃ - 70 ℃

· Drop test: it can withstand the drop from 10 feet (about 3 meters) to the concrete floor

· Waterproof and dust-proof: IP68

3. Frequency (customizable)：

Power1 169.8KHz

Power2 134KHz(EU)

Water 145.7 KHz

Sanitary 121.6 KHz

Telecom 101.4 KHz

Gas 83 KHz

General 66.35 KHz

Performance

Characteristics	Model
Characteristics	ED3000-XR	ED3000ID-RW
No ID maximum detectable depth	3.0~3.5m	3.0~3.5m
Maximum ID read depth	Not Supported	2.8~3.2m
Maximum write depth	Not Supported	<1.0m
ID Number Format	Not Supported	3 digit customer number+10 digit ID number
Writable information content	Not Supported	Type and specification of the identified object

Notes：The performance ofmarkers varies slightly at different frequencies, and the same marker also performs slightly differently in different noise environments. The following data are test values in a typical urban environment. If the installation location is in a non urban environment, the effect will be better. On the contrary, if the installation environment is in an industrial area or an area with complex electromagnetic interference, the effect will be worse.